How to undo air bubbles on applied graphics

~ bubble pin trick

The most effective way to undo air bubbles underneith applied atv graphics is by first lightly heating the sticker with a hair dryer untill it's warm to the touch. Then take a small pin or needle, poke a hole in the bubble and work out the bubble by applying enough pressure to completely remove the air bubble.

If the air bubble has grown too big or you applied your graphics in the wrong manner resulting in multiple air bubbles present, you might consider calling up your graphics dealer and ask them to send you a new kit for free to re-apply the graphics. Most of them will.

In that case you should follow the steps explained here: How to install atv graphics propperly.